ITExamDump의 Microsoft인증 070-544-VB덤프를 공부하여Microsoft인증 070-544-VB시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한Microsoft인증 070-544-VB덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다.
Microsoft인증 070-412시험은 등록하였는데 시험준비는 아직이라구요? Microsoft인증 070-412시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의Microsoft인증 070-412덤프와의 근사한 만남이Microsoft인증 070-412패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의Microsoft인증 070-412덤프로 시험패스에 고고싱하세요.
ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은Microsoft 070-544-VB인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft 070-544-VB관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는Microsoft 070-544-VB자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는Microsoft 070-544-VB인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.
시험 이름: TS: Ms Virtual Earth 6.0, Application Development
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 070-544-VB응시료
100% 합격율 보장
Q&A: 67 문항 070-544-VB덤프다운
업데이트: 2014-05-27
070-544-VB응시료: >>펼쳐보기
시험 이름: Configuring Advanced Windows Server 2012 Services
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 070-412시험문제
100% 합격율 보장
Q&A: 186 문항 070-412 dumps
업데이트: 2014-05-27
070-412시험문제: >>펼쳐보기
ITExamDump를 선택함으로 여러분은 Microsoft 인증070-544-VB시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 Microsoft 인증070-544-VB시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는Microsoft 인증070-544-VB덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며Microsoft 인증070-544-VB시험을 한번에 패스하도록 도와드립니다.
우리 ITExamDump사이트에서 제공되는Microsoft인증070-544-VB시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에Microsoft인증070-544-VB시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
많은 분들은Microsoft 070-412인증시험이 아주 어려운 것은 알고 있습니다. 하지만 우리ITExamDump를 선택함으로Microsoft 070-412인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Tes의Microsoft 070-412합습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다. 우리의 서비스는Microsoft 070-412구매 후 최신버전이 업데이트 시 최신문제와 답을 모두 무료로 제공합니다.
070-544-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-544-VB.html
NO.1 You are creating a Virtual Earth 6.0 application. The application will use data that is stored in the
Microsoft MapCruncher output format.
The MapCruncher output is defined in the following manner:
var tileSrc = http://dev.live.com/virtualearth/sdk/layers/layer1
You need to ensure that the application displays the data as a new layer on the Virtual Earth map.
Which code segment should you use?
A. var tileSourceSpec = new VETileSourceSpecification("layer1/%4.png", tileSrc);
map.AddTileLayer(tileSourceSpec, true);
B. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%4);
map.AddTileLayer(tileSourceSpec, true);
C. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + "/%4.png");
map.AddTileLayer(tileSourceSpec, true);
D. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%1.png);
map.AddTileLayer(tileSourceSpec, true);
Answer: C
Microsoft 070-544-VB IT덤프 070-544-VB기출문제 070-544-VB기출문제 070-544-VB자격증신청 070-544-VB시험후기
NO.2 You are writing a code segment for a Virtual Earth 6.0 application. The code segment returns data for
multiple locations to a client-side JavaScript function that makes the initial request.
The returned data contains the following properties for each location:
ID
Latitude
Longitude
Address
You need to format all locations and their properties in JavaScript Object Notation (JSON) format.
Which code segment should you use?
A. var results = new Array();
results[0] = 123;
results[1] = 40.0;
results[2] = -74.0;
results[3] = " 123 Main St .";
B. var results = new Array();
results[0] = new Array();
results[0][0] = 123;
results[0][1] = 40.0;
results[0][2] = -74.0;
results[0][3]= " 123 Main St .";
C. var results = {
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St ."
};
D. var results = {
0:{
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St "
}
};
Answer: D
Microsoft응시료 070-544-VB 070-544-VB pdf 070-544-VB기출문제
NO.3 You are creating a Virtual Earth 6.0 application that retrieves locations from a Microsoft SQL Server
2005 database.
A stored procedure will be used to retrieve only locations that lie within the currently displayed map area.
You need to define the boundary within which the locations displayed on the map must lie.
How should you define the boundary?
A. points represented by the bottom-right and top-left pixel coordinates
B. points represented by the bottom-right and top-left latitude and longitude coordinates
C. the center point of a circle whose radius is equal to the size of the map based on pixel coordinates
D. the center point of a circle whose radius is equal to the size of the map based on latitude and longitude
coordinates
Answer: B
Microsoft PDF 070-544-VB최신덤프 070-544-VB
NO.4 You are creating a custom tile set by using Microsoft MapCruncher.
The tile set must overlay a weather map image in a Virtual Earth 6.0 application by using MapCruncher.
You need to perform two tasks before using MapCruncher to create the custom tile set.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Split the weather map image into tiles.
B. Obtain the latitude and longitude coordinates for the corners of the weather map image.
C. Apply the proper alpha filter to the weather map image to display any transparent portions on the
Virtual Earth map.
D. Obtain low resolution weather map images for low zoom levels and high resolution weather map
images for high zoom levels.
Answer: B AND C
Microsoft시험정보 070-544-VB인증 070-544-VB시험
NO.5 You are integrating third-party data into a Virtual Earth 6.0 application. The data that is retrieved from
the third party is stored in an array named Results. The Results array is stored inside a Web handler. The
data is stored in the following format.
The Web handler uses the GeoRSSFeed class to accept items of type GeoRSSItem. The class contains
the ToString() method that writes the GeoRSS feed to a string.
The Web handler GeoRSS integration is defined by the following code segment. (Line numbers are
included for reference only.)
You need to encode the data inside the Results array into the GeoRSS format.
Which code segment should you insert at line 05?
A. Dim objEnumerator As IEnumerator
Dim Keys As Collections.Generic.Dictionary(Of String, _ String).KeyCollection = Results(i).Keys()
Dim curKey As String
objEnumerator = Keys.GetEnumerator()
Do While objEnumerator.MoveNext
curKey = objEnumerator.Current
curItem.Add(curKey, Results(i)(curKey))
Loop
B. curItem.Add("title", Results(i)("name"))
curItem.Add("description", Results(i)("address"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
curItem.Add("icon", Results(i)("thumbnail"))
C. curItem.Add("title", Results(i)("name"))
curItem.Add("description", String.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail")))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
D. curItem.Add("name", Results(i)("name"))
curItem.Add("address", string.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
Answer: C
Microsoft 070-544-VB시험정보 070-544-VB자격시험 070-544-VB dump 070-544-VB Dumps
NO.6 You deploy a Virtual Earth 6.0 application that uses Microsoft ASP.NET Asynchronous JavaScript and
XML (AJAX) implementation to retrieve data.
The myAjaxCallback function evaluates any AJAX response. The function contains the following code
segment. (Line numbers are included for reference only.)
At the time the request was made, the server was overloaded. When the server processed the AJAX
request, the server returned an error message.
You need to ensure that the application does not produce a fatal exception due to the error generated
from the AJAX response.
Which code segment should you insert at line 03?
A. If(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
else{
// Update user with status here.
}
B. try{
eval(xmlHttp.responseText);
}
catch(error){
// Update user with status here.
}
C. try{
eval(xmlHttp.responseText);
}
catch(error){
eval(xmlHttp.responseXML);
}
D. try{
eval(xmlHttp.responseText);
}
catch(error){
if(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
}
Answer: A
Microsoft교재 070-544-VB 070-544-VB자격시험 070-544-VB시험정보 070-544-VB시험자료
NO.7 A Virtual Earth 6.0 application loads locations from a local Microsoft SQL Server 2005 database. You
update locations in the database manually.
You plan to automate the manual process.
You need to ensure that the automation process updates the maximum number of locations in the least
amount of time.
What should you do?
A. Call the Find method for each location by using Microsoft MapPoint Web Service.
B. Call the FindAddress method for each location by using Microsoft MapPoint Web Service.
C. Push all locations to Customer Data Services by using the UploadSpecification class, and retrieve the
results.
D. Push all locations to Customer Data Services by using the BatchGeocodeSpecification class, and
retrieve the results.
Answer: D
Microsoft자격증 070-544-VB인증덤프 070-544-VB최신버전덤프
NO.8 Your Microsoft MapPoint Web Service (MWS) User Id is 124566, and your MWS password is
P@ssw0rd.
You need to use MWS to create an application.
Which code segment should you use?
A. Dim appCredential As New System.Net.NetworkCredential("124566", "P@ssw0rd")
B. Dim appCredential = New System.Security.Principal.NTAccount("124566", "P@ssw0rd")
C. Dim appCredential As New System.Security.Principal.GenericIdentity("124566", "P@ssw0rd")
D. Dim appCredential As New System.EnterpriseServices.SecurityIdentity("124566", "P@ssw0rd")
Answer: A
Microsoft 070-544-VB시험 070-544-VB기출문제
댓글 없음:
댓글 쓰기